Today’s Maker Feature is about Jeff from Twisted Scenic. We’ve heard from Jeff before when he shared about his Bonnaroo sign build. Today, we get a look behind the scenes to hear more about his personal maker story and background. Q: Tell us a little about your background as a Maker. A few years ago
For this next Maker Feature we’re interviewing Tim Sway. If you’re not familiar with Tim, he’s the master of making instruments (guitars mostly) and other fun projects from reclaimed materials. We were SO excited to have him join our community when he purchased his Maslow earlier this year and have loved seeing his projects using
We’re excited to kick off a new blog series, Maker Feature, where we get to share the stories and projects of some of the makers in our community. Today, we’re kicking off the series with our very own Rachel! She’s one of our resident makers here at Maker Made. If you’ve used our new set
We’re so excited to be sharing this project today. Jeff McLeid from Twisted Scenic had the opportunity to do an installation project for Bonnaroo. He designed, cut an installed the entrance to the “Self Love Sanctuary” hosted by Haley Williams of Paramore. Jeff says, “Itβs 1 layer of hdpe, 1/8β plexi, 1/2β mdf, 1/4β polycarbonate
If you have your Z-Axis set up and the calibration step went well, you shouldn’t have any problems cutting the final sled. I ended up getting a prototype of the new MakerMade sled in the mail, so I used that, and it was so nice to have it all ready to go. I just had
MAKING ALL THE MISTAKES SO YOU DON'T HAVE TO Up until the point of calibration, I had a few misadventures but mostly things went pretty smoothly. This is where it got bumpier. In the online assembly instructions on the Maslow forum, Step 6 was "attach sled to frame" and Step 7 was "calibrate". So I
MAKING ALL THE MISTAKES SO YOU DON'T HAVE TO Adding the Z Axis had its challenges, and reliable Z Axis operation continues to be an issue for many Maslow users. While I was in the thick of setting it up, it felt like I'd never get it to work, but after working through a lot
I've never used a router, so this part was a bit of a challenge. I didn't know how to add the bit, for one thing, and there were a surprising dearth of Youtube videos showing how to do it, at least for this particular router. I watched a lot of reviews of the Ridgid router,
I was a little apprehensive about setting up the electronics for the Maslow. I've been an occasional reader of Make magazine, I'd heard the term Arduino, but I'd never seen one in person. I like to make things, but that's mostly been rough woodworking, fiber related, or graphic design- nothing with electronics or chips of
One of the things that makes the. Maslow CNC so affordable is that each user builds their own frame. Maslow users are tinkerers, and variations on the frame are endless. Two users, dlang and MadGrizzle, did a lot of testing and weeding through ideas and developed the default frame. It’s a great frame to start